PostFrontal Forum
PostFrontal Forum
PF Home | International_Forum | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?


 All Forums
 LK8000 International Support
 Hardware
 LK8000 Android and IOIO
 New Topic  Reply to Topic
Author Previous Topic Topic Next Topic  

D-2402
Pulcino

Germany
25 Posts

Posted - 30/03/2018 :  16:34:07  Show Profile  Reply with Quote
Hi all,

I'm considering switching from xcsoar to lk8000. Installed it on my wayteq x995 (Android 4.4.2 / latest lk8000 from play store). Works fine in SIM mode and also works with internal gps. However lk800 refuses to speak to my Flarm and LX1600. Flarm is hooked to IOIO UART0 and LX1600 to UART1. This is an "old" IOIO - i.e. not OTG. Connection settings are identical to xcsoar. Yet no connection, no data visible in terminal. Tried both serial modes in the respective device set ups. No luck.

Does anyone have any pointers as to how to make lk8000 speak to my IOIO?

thanks
Torsten

Unix is a registered trademark of AT&T. AT&T is a modem test command.

brunotl
Aquila imperiale

France
562 Posts

Posted - 30/03/2018 :  16:54:34  Show Profile  Reply with Quote
you say "old IOIO", so the problem come probably from IOIO firmware version
we use offical clinet IOIO library version 5.07, XCSoar use it's own version ( 5.04 with downgrade hardware requirement and some other change )

Client/Firmware compatibily table can be found here : https://github.com/ytai/ioio/wiki/Downloads
Go to Top of Page

D-2402
Pulcino

Germany
25 Posts

Posted - 30/03/2018 :  20:32:55  Show Profile  Reply with Quote
Hi Bruno,

thanks for the rapid reply. I find this IOIO compatibility matrix quite confusing :-) If I upgraded my board, will it still run w/ xcsoar afterwards? Do you know? I can't seem to find the answer to that question in the docs.

regards
Torsten

Unix is a registered trademark of AT&T. AT&T is a modem test command.
Go to Top of Page

brunotl
Aquila imperiale

France
562 Posts

Posted - 31/03/2018 :  17:30:26  Show Profile  Reply with Quote
quote:
Originally posted by D-2402

Hi Bruno,

thanks for the rapid reply. I find this IOIO compatibility matrix quite confusing :-) If I upgraded my board, will it still run w/ xcsoar afterwards? Do you know? I can't seem to find the answer to that question in the docs.

regards
Torsten



yes no problem
Go to Top of Page

Alebu
Pulcino

Italy
68 Posts

Posted - 03/12/2018 :  16:58:11  Show Profile  Reply with Quote
Hi All,
it is long time I'm trying to control my new radio KRT2 from LK8000 on Android 7 smartphone, via IOIO-OTG V2.2 board. While I succesfully linked Condor and AirGlide Vario S to LK8000, I never had any sort of communication among KRT2 and LK8000. I also tried the IOIO + BT connection. The BT pairing is not an issue but no any control to/from the KRT2.
Is there anybody that succesfully realized the KRT2/LK8000 connection via IOIO-OTG board?

Thanks

Alebu
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
Jump To:
PostFrontal Forum © PostFrontal - La community del Volo a Vela Go To Top Of Page
This page was generated in 0.15 seconds. Snitz Forums 2000

Suggerimenti dello staff:

               

Note legali (italiano):
Privacy Policy Cookie Policy
Legal notice (english):
Privacy Policy Cookie Policy

PostFrontal S.A.S. di Giuliano Golfieri & c. - P.I. 05264240960