| Author |
 Topic  |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
 Posted - 29/09/2020 : 20:46:05
|
I was flying locally today, not realising that the Android version had been updated to s. Because we were in a big blue hole, I was motoring to the clouds, and the Glidebar indication was increasing as expected.
After a few minutes it was showing over 1000 ft above glideslope to get Home with +600 ft, then suddenly it changed and showed that I was below glidesope.
Over the flight this happened, seemed to correct, and repeated several times. The distance and heights did not change when this happened,so it could only be something going wrong in the calculation. It happens in replay. |
|
|
brunotl
Pterodattilo
France
1097 Posts |
Posted - 30/09/2020 : 09:43:50
|
Arrival height depends of 4 value :
- Current Altitude
- Distance to Target
- Target Altitude
- MacCready settings
so check your AutoMC settings ...
if you can replicate in replay, please share your settings and igctrack and procédure to replicate... |
Edited by - brunotl on 30/09/2020 09:47:57 |
 |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 30/09/2020 : 10:53:35
|
| You are correct Bruno, when this happens Mc suddenly increases to around 10. I hadn't noticed that, because I had been on manual previously in v. p, so not expecting it. Auto Mc sertting was Both Final+Average. Running the same logger file, with Auto Mc off, it does not happen. Thanks. |
|
|
|
brunotl
Pterodattilo
France
1097 Posts |
Posted - 30/09/2020 : 11:00:30
|
quote:
Originally posted by davesalmon
You are correct Bruno, when this happens Mc suddenly increases to around 10. I hadn't noticed that, because I had been on manual previously in v. p, so not expecting it. Auto Mc sertting was Both Final+Average. Running the same logger file, with Auto Mc off, it does not happen. Thanks.
i'm still interested by your setting, task and track to check if something is wrong with AutoMC ... |
|
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 30/09/2020 : 13:20:54
|
| Which settings do you need? |
|
|
|
brunotl
Pterodattilo
France
1097 Posts |
Posted - 30/09/2020 : 14:02:08
|
| simpler way : put Aircraft and system profile and igc file and task file in archive and send it to me. |
|
|
|
BravoLima
Aquilotto
Netherlands
276 Posts |
|
|
AlphaLima
Moderator
Germany
1978 Posts |
|
| |
Topic |
|
Glideslope calculation
