Author |
Topic |
villamany
Pulcino
Spain
7 Posts |
Posted - 05/01/2019 : 11:41:53
|
Thanks, but finally seems to be a defective touch screen. So i will try a new unit. |
|
|
villamany
Pulcino
Spain
7 Posts |
Posted - 15/01/2019 : 14:38:09
|
Testing a new Clara HD unit and seems to works fine like on the Aura 2ed! On the Clara HD a little better resolution but you need to get booth at the same time for acuse it. Also more free RAM on the Clara.
|
Edited by - villamany on 17/01/2019 12:46:12 |
|
|
Andrew Mogg
Pulcino
Germany
27 Posts |
Posted - 11/08/2019 : 14:40:49
|
Has there been any progress on the Clara as far as OTG and/or LKNet goes? |
|
|
ernst-dieter
Aquilotto
Germany
203 Posts |
Posted - 07/03/2020 : 16:08:50
|
Same question ... as my Glow HD is fading out. Clara HD would be the candidate next to |
|
|
ernst-dieter
Aquilotto
Germany
203 Posts |
Posted - 07/03/2020 : 16:51:52
|
I have already tried the 7.1l-otg-kernel experimentally on the Clara HD. All seems to be fine (handling, graphics etc.) EXCEPT that there is no suitable serial port to connect to. A lot of serial ports are showing up but no one with an attractive name similar to ttyUSB0. A lonely ttymxc0 port can be connected without error but does not transmit anything from my S80. Any hope?
|
|
|
brunotl
Pterodattilo
France
1090 Posts |
Posted - 07/03/2020 : 17:47:23
|
USB otg is not supported on Clara HD. sorry. |
|
|
ernst-dieter
Aquilotto
Germany
203 Posts |
Posted - 07/03/2020 : 17:49:33
|
O.k. Bruno, but not principially ? |
|
|
brunotl
Pterodattilo
France
1090 Posts |
Posted - 07/03/2020 : 17:55:42
|
i've tried to make a otg kernel but without success, that seems out of my skill... |
|
|
ernst-dieter
Aquilotto
Germany
203 Posts |
Posted - 07/03/2020 : 18:21:57
|
Don't hide your light under a bushel. |
|
|
falchettogiallo
Pulcino
Italy
41 Posts |
Posted - 11/03/2020 : 14:36:45
|
quote: Originally posted by ernst-dieter
I have already tried the 7.1l-otg-kernel experimentally on the Clara HD. All seems to be fine (handling, graphics etc.) EXCEPT that there is no suitable serial port to connect to. A lot of serial ports are showing up but no one with an attractive name similar to ttyUSB0. A lonely ttymxc0 port can be connected without error but does not transmit anything from my S80. Any hope?
You could connect directly to the ttymxc0 pins on the Clara motherboard. I've done something similar on my Kobo HD and it works like a charm!
|
|
|
ernst-dieter
Aquilotto
Germany
203 Posts |
Posted - 12/03/2020 : 08:08:06
|
Thanks ... can not see the appended picture Sorry, seems related to my installation |
Edited by - ernst-dieter on 12/03/2020 09:47:53 |
|
|
ernst-dieter
Aquilotto
Germany
203 Posts |
Posted - 12/03/2020 : 08:10:30
|
Which voltage level is to apply? (3,3V?) |
Edited by - ernst-dieter on 12/03/2020 09:48:57 |
|
|
falchettogiallo
Pulcino
Italy
41 Posts |
Posted - 12/03/2020 : 12:19:01
|
quote: Originally posted by ernst-dieter
Which voltage level is to apply? (3,3V?)
Yes, signals levels are 3,3 |
|
|
Andrew Mogg
Pulcino
Germany
27 Posts |
Posted - 23/03/2020 : 22:27:18
|
I am now trying to connect a Bluefly to the Clara. I managed to change the baudrate as mentioned in this post. I connected the tx to rx, rx to tx, GND and VCC. When I turn on the Kobo I am able to turn on the Bluefly, but I cant find the port /dev/ttyACMO. When I enter device set up>device configuration> terminal I get a No Data. What am I missing? Any ideas? |
|
|
bambuko
Aquilotto
United Kingdom
209 Posts |
Posted - 23/03/2020 : 23:11:05
|
on my Clara in Device configuration it is: Name- BlueFlyVario Port- /dev/ttymxc0 Baudrate- 115200 8bit |
|
|
Topic |
|