| Author |
 Topic  |
|
|
obetz
Falchetto
138 Posts |
 Posted - 25/06/2023 : 14:13:12
|
Hi all,
tried twice to "Declare" in the Task Edit but failed. RUNTIME-log says:
[...]
[003932878] . Device A is <Internal> Port=Internal
[003932887] . Device B is <LX Nano 3> Port=BT_SPP:34:81:F4:71:B1:75
[003932888] . LX Nano 3 installed (platform=le test=1)
[003932888] . Device C is DISABLED.
[003932888] . Device D is DISABLED.
[003932888] . Device E is DISABLED.
[003932888] . Device F is DISABLED.
[003932888] . ComPort 2 ReadThread : started
[003933020] . GCE_STARTUP_REAL
[003933020] . ProgramStarted=NormalOp h10:24:53 (NO FIX)
[003933020] . Free ram=152152 K storage=4294967295 K
[003933309] . LoadTask : </storage/emulated/0/Android/data/org.lk8000.test/files/_Tasks/Default.lkt>
[003934206] . First GPS DATE: 2023-6-24 h10:24:53 (NO FIX)
[003935278] . LK Battery Manager V1 started, current charge=100%
[003937180] . NINC
[003937181] . NINC Serial Number 33859
[003937182] . NINC Software Vers.: 9.13
[003937182] . NINC Hardware Vers.: 8.00
[003942882] ... GPS baro source back available h10:25:00 (UTC 10:25)
[003944981] . ComPort 2 ReadThread : terminated
[003945821] Error! Task NOT declared : Device not responsive!
[...]
LX S100 connected via Bluetooth to an Android phone.
Any hints?
|
Edited by - obetz on 25/06/2023 14:21:34 |
|
|
brunotl
Pterodattilo
France
1181 Posts |
Posted - 25/06/2023 : 19:23:38
|
last LK8000 version ? should work...
send private message to me...
|
Edited by - brunotl on 25/06/2023 19:26:49 |
 |
|
|
Marco from Hangar 5
Pterodattilo
Netherlands
899 Posts |
Posted - 25/07/2023 : 13:04:06
|
Are you sure it does not work? I have a S80, and when I declare a task from LK8000 via Bt, the S80 receives the task, BUT the S80 attempts to send the task to the PowerMouse, but that fails of course, because the PowerMouse is not IGC certified. the S80 then gives all kinds of error messages, but the task is present in the S80.
You need an IGC certified device (Flarm or Logger) to be able to declare tasks in such device, if not that will not work, hence the 'Device is not responsive' error message.
Third possibility is that a FLARM Display is interfering with the communication. I have solved it by cutting the RX wire in the data cable from the Flarm to the display, so the display cannot send data back to the flarm. Some pilots have build in a switch to temporarily disconnect the display unit from the Flarm. |
Marco
BU (PH-588)
Mini Nimbus HS7, s/n 039
http://www.zweef.nl/
Zweefvliegcentrum Noordkop, NETHERLANDS |
|
|
|
brunotl
Pterodattilo
France
1181 Posts |
Posted - 25/07/2023 : 14:31:40
|
| in last beta (version >= 7.4.6), the "LX Nano 3" driver include fix to solve the problem reported by @obetz |
|
|
|
Marco from Hangar 5
Pterodattilo
Netherlands
899 Posts |
Posted - 26/07/2023 : 00:11:51
|
quote:
Originally posted by brunotl
in last beta (version >= 7.4.6), the "LX Nano 3" driver include fix to solve the problem reported by @obetz
Ok, thanks, I will try the Beta as well, as I am not 100% sure about my argument that a FLARM needs to be IGC certified. Will let you know if it works or not. My S80 is also not IGC certified, but does accept a task declaration, it only fails to send it to the PowerMouse. |
Marco
BU (PH-588)
Mini Nimbus HS7, s/n 039
http://www.zweef.nl/
Zweefvliegcentrum Noordkop, NETHERLANDS |
|
|
|
obetz
Falchetto
138 Posts |
Posted - 26/07/2023 : 16:00:55
|
| JFTR, with the current beta I could declare a task in the S100, many thanks to brunotl! |
Edited by - obetz on 26/07/2023 16:01:26 |
|
|
| |
Topic |
|
Failed to declare task on S100