| Author |
 Topic  |
|
|
vandortmond
Pulcino
Netherlands
36 Posts |
 Posted - 27/04/2020 : 14:08:40
|
Help, I need some help!
Kobo Aura One, LK8000, BlueFlyVario v12. This used to work fine. I installed LK8000 7.1 and now I get:
GPS:No ComPort, plus Unable to open ports.
When I go to Device setup and Terminal, I get
Terminal Device A (DISABLED) and
(Rx=0, Tx=0 ErrRx=0 ErrTx=0)
NO DATA RECEIVED
Device A has Name: BlueFlyVario and Baud rate 115200
I reinstalled LK8000 7.0, no difference. I reinstalled older version of Kobo firmware, no difference.
What is going on??
Any ideas???
Thanks,
Robert |
Robert van Dortmond |
|
|
brunotl
Pterodattilo
France
1096 Posts |
Posted - 27/04/2020 : 19:54:50
|
what is the port you use ?
|
 |
|
|
vandortmond
Pulcino
Netherlands
36 Posts |
Posted - 30/04/2020 : 16:59:54
|
Thank you Brunetti and sorry for the late reaction!
I tried all ports, non worked. Neither with 7.0 nor 7.1
Meanwhile, I got it working and I think the "solution" is something for the LK8000 development team to look into.
Fortunately, I had saved the _Configuration file from the working 7.0 version I used until a few weeks ago. I copied that _Configuration into the .Kobo file, replacing the one that was there, from 7.1 on my Kobo, and it worked.
Restoring factory settings on my Kobo and subsequently installing either 7.0 from the LK8000 site, or 7.1 from Git, did not do it. I could not get it to cummunicate with BlueFlyVario V1.2.
I do not know why, but it seems worth finding out for future users!
Robert |
Robert van Dortmond |
|
|
|
vandortmond
Pulcino
Netherlands
36 Posts |
Posted - 30/04/2020 : 17:01:26
|
| Sorry, Brunoti and not Brunetti!!! |
Robert van Dortmond |
|
|
|
bambuko
Aquilotto
United Kingdom
209 Posts |
Posted - 30/04/2020 : 18:16:31
|
Something is wrong with your setup Rob?,
I have kobo Clara HD with BF v12 and LK 7.1h installed - everything works fine
(using port:/dev/ttymxc0 brunotl) |
|
|
|
brunotl
Pterodattilo
France
1096 Posts |
Posted - 01/05/2020 : 00:01:47
|
quote:
Originally posted by vandortmond
Fortunately, I had saved the _Configuration file from the working 7.0 version I used until a few weeks ago. I copied that _Configuration into the .Kobo file, replacing the one that was there, from 7.1 on my Kobo, and it worked.
compare the 2 configuration using tools like "WinMerge"...
i have upgraded all officialy supported kobo model from 7.0 to 7.1 without any issue (kobo Aura one is not officialy supported, but reported working without any issues by few end user ...)
|
|
|
| |
Topic |
|
BlueFlyVario suddenly not working anymore