Author |
Topic |
AlphaLima
Moderator
Germany
1978 Posts |
Posted - 06/04/2020 : 19:31:13
|
Which driver do you use? |
|
|
AlphaLima
Moderator
Germany
1978 Posts |
|
rflantua
Pulcino
Netherlands
33 Posts |
Posted - 10/04/2020 : 01:03:16
|
Hi AlphaLima, After installing the new version is still have in the startup screen the previous version… 7.1k Mar 3 2020
This version works quite well but when the device (gps source) is not found and com ports are reset the system blocks and have a Application Error on my Oudi2. "Application LK8000-PNA.exe encountered a serious error and must shut down."
Kind regards, Rob
|
Rob Flantua DG-800B 18m D-KEDI (RF) |
|
|
rflantua
Pulcino
Netherlands
33 Posts |
Posted - 10/04/2020 : 01:09:42
|
quote: Originally posted by rflantua
Hi AlphaLima, After installing the new version is still have in the startup screen the previous version… 7.1k Mar 3 2020
This version works quite well but when the device (gps source) is not found and com ports are reset the system blocks and have a Application Error on my Oudi2. "Application LK8000-PNA.exe encountered a serious error and must shut down."
Kind regards, Rob
When starting up the system returns unable to open port 301412020128 |
Rob Flantua DG-800B 18m D-KEDI (RF) |
|
|
AlphaLima
Moderator
Germany
1978 Posts |
Posted - 10/04/2020 : 16:20:48
|
Yes, it is still shown as k version. This was already said in the previous post.
Sounds like you have a corrupt device config file. Start in SIM mode, re-configure the device and restart in flight mode. |
Edited by - AlphaLima on 10/04/2020 16:22:26 |
|
|
rflantua
Pulcino
Netherlands
33 Posts |
Posted - 10/04/2020 : 20:39:08
|
quote: Originally posted by AlphaLima
Yes, it is still shown as k version. This was already said in the previous post.
Sounds like you have a corrupt device config file. Start in SIM mode, re-configure the device and restart in flight mode.
THX AL, I'll try the SIM mode for new device config file. Sorry I missed the post about version k or l. |
Rob Flantua DG-800B 18m D-KEDI (RF) |
|
|
rflantua
Pulcino
Netherlands
33 Posts |
Posted - 10/04/2020 : 21:23:49
|
quote: Originally posted by rflantua
quote: Originally posted by AlphaLima
Yes, it is still shown as k version. This was already said in the previous post.
Sounds like you have a corrupt device config file. Start in SIM mode, re-configure the device and restart in flight mode.
THX AL, I'll try the SIM mode for new device config file. Sorry I missed the post about version k or l.
Tried setting up the devices again in Sim mode. System returns again with unable to open port 301412020128. What port is this? I configures a device A LX16XX for com4 at 4800 Baud and device C Generic for com1 at 4800 baud. The port 301412020128 is a BT port but I haven't selected it as it seems not to work. Still LK is looking for it...
|
Rob Flantua DG-800B 18m D-KEDI (RF) |
|
|
AlphaLima
Moderator
Germany
1978 Posts |
Posted - 11/04/2020 : 01:11:11
|
Make sure all other ports are disabled. |
|
|
wrogers
Pulcino
USA
80 Posts |
Posted - 11/04/2020 : 06:45:53
|
During the last day or two I've bench tested my new LXNAV S100 connected to a Nokia 8 via Bluetooth. Periodically with 7.1l and not on 7.0... somehow the S100 altitude jumps from 2440feet to 8600feet. On inspection, I noticed that the QNH value jumped from 29.80Hg to 36.xx... accounting for the altitude change.
It has something to do with the Nano3 driver I think. It must be sending something to the S100 causing the big QNH change. This does not happen on v7.0 with the Nano3 driver.
I'll work on getting a runtime.log after I figure out a good Android app for inspecting the filesystem. ES File Explorer had a lot of confusing ads and features interfering with my understanding.
Walt Rogers WX
|
Walter Rogers Palmdale, California Discus 2a "WX" |
|
|
wrogers
Pulcino
USA
80 Posts |
|
Topic |
|