| Author |
 Topic  |
|
|
mana
Pulcino
33 Posts |
 Posted - 06/02/2020 : 13:50:26
|
LK8000 7.1 Android. I have set Airspace display to Auto, Filling to semi-transparent. When I get an airspace (D) warning window and acknowledge it, then the airspace is cleared but the borders remain. I want it back and filled semi-transparent, but I didn’t manage to do it.
With a long press on the airspace I can get the specific airspace window, then I disable the airspace and close the window. Next I call the window again and enable the airspace.
I see the airspace filled for a few seconds, then it becomes clear again – only borders.
Is this intended, or a bug? How do I make the airspace be semi-transparent again after I acknowledged it?
|
|
|
mana
Pulcino
33 Posts |
|
|
AlphaLima
Moderator
Germany
1978 Posts |
Posted - 06/02/2020 : 20:05:47
|
The removed filling indicates the airspace was acknolaged!
If you don't want it to disapear just click OK instead of ACK, or wait for the dialog to disapear, thats the way it is intended to work.
The waring dialog time is adjustable in the Airspace warnings dialog.
Also the acknolage time is adjustable.
|
 |
|
|
mana
Pulcino
33 Posts |
Posted - 06/02/2020 : 21:34:31
|
| Thanks. If I pressed ack by mistake, how do I get the airspace to be filled again? |
|
|
|
AlphaLima
Moderator
Germany
1978 Posts |
Posted - 07/02/2020 : 21:38:26
|
wait for the acknolage time is over or restart LK.
good point, I will change it to be reset if the airspace is turned Off/On.
However touching ACK by mistake? Is is such a huge button! |
|
|
|
mana
Pulcino
33 Posts |
Posted - 08/02/2020 : 14:31:31
|
| well, it was not that I pressed on the wrong button, but rather that I had misunderstood the behavior of Ack :-). I like the idea of resetting it when disabled/enabled |
|
|
|
AlphaLima
Moderator
Germany
1978 Posts |
|
| |
Topic |
|
Airspace ack problem