Author |
Topic |
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 03/06/2019 : 16:21:05
|
A friend has a Red Box Flarm connected to a splitter, one cable going to the Flarm display, which seems to work OK. The other cable goes to an Oudie running LK8000, and no Flarm data is received. Can anyone suggest the correct device settings please, baud is set at 19,200. |
|
AlphaLima
Moderator
Germany
1978 Posts |
Posted - 03/06/2019 : 17:38:46
|
we have a terminal window for debugging, do you see any kind of data coming in? If you see no data coming in, the COM Port or wiring is wrong. If you see wired characters the Baudrate most probably wrong. |
Edited by - AlphaLima on 03/06/2019 17:39:28 |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 03/06/2019 : 18:10:50
|
He says terminal shows no data coming in, baud rate is definitely 19,200, he selected Generic, and tried several com ports, I think 1, 4, 7. Not sure about any others. |
|
|
|
Topic |
|
|
|