PostFrontal Forum
PostFrontal Forum
PF Home | International_Forum | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?


 All Forums
 LK8000 International Support
 Hardware
 kobo Clara HD
 New Topic  Reply to Topic
Previous Page
Author Previous Topic Topic Next Topic
Page: of 2

villamany
Pulcino

Spain
7 Posts

Posted - 05/01/2019 :  11:41:53  Show Profile  Reply with Quote
Thanks, but finally seems to be a defective touch screen. So i will try a new unit.
Go to Top of Page

villamany
Pulcino

Spain
7 Posts

Posted - 15/01/2019 :  14:38:09  Show Profile  Reply with Quote
Testing a new Clara HD unit and seems to works fine like on the Aura 2ed!
On the Clara HD a little better resolution but you need to get booth at the same time for acuse it. Also more free RAM on the Clara.

Edited by - villamany on 17/01/2019 12:46:12
Go to Top of Page

Andrew Mogg
Pulcino

Germany
27 Posts

Posted - 11/08/2019 :  14:40:49  Show Profile  Reply with Quote
Has there been any progress on the Clara as far as OTG and/or LKNet goes?
Go to Top of Page

ernst-dieter
Falchetto

Germany
199 Posts

Posted - 07/03/2020 :  16:08:50  Show Profile  Reply with Quote
Same question ... as my Glow HD is fading out. Clara HD would be the candidate next to
Go to Top of Page

ernst-dieter
Falchetto

Germany
199 Posts

Posted - 07/03/2020 :  16:51:52  Show Profile  Reply with Quote
I have already tried the 7.1l-otg-kernel experimentally on the Clara HD. All seems to be fine (handling, graphics etc.) EXCEPT that there is no suitable serial port to connect to. A lot of serial ports are showing up but no one with an attractive name similar to ttyUSB0. A lonely ttymxc0 port can be connected without error but does not transmit anything from my S80. Any hope?
Go to Top of Page

brunotl
Pterodattilo

France
772 Posts

Posted - 07/03/2020 :  17:47:23  Show Profile  Reply with Quote
USB otg is not supported on Clara HD. sorry.
Go to Top of Page

ernst-dieter
Falchetto

Germany
199 Posts

Posted - 07/03/2020 :  17:49:33  Show Profile  Reply with Quote
O.k. Bruno, but not principially ?
Go to Top of Page

brunotl
Pterodattilo

France
772 Posts

Posted - 07/03/2020 :  17:55:42  Show Profile  Reply with Quote
i've tried to make a otg kernel but without success, that seems out of my skill...
Go to Top of Page

ernst-dieter
Falchetto

Germany
199 Posts

Posted - 07/03/2020 :  18:21:57  Show Profile  Reply with Quote
Don't hide your light under a bushel.
Go to Top of Page

falchettogiallo
Pulcino

Italy
27 Posts

Posted - 11/03/2020 :  14:36:45  Show Profile  Reply with Quote
quote:
Originally posted by ernst-dieter

I have already tried the 7.1l-otg-kernel experimentally on the Clara HD. All seems to be fine (handling, graphics etc.) EXCEPT that there is no suitable serial port to connect to. A lot of serial ports are showing up but no one with an attractive name similar to ttyUSB0. A lonely ttymxc0 port can be connected without error but does not transmit anything from my S80. Any hope?



You could connect directly to the ttymxc0 pins on the Clara motherboard. I've done something similar on my Kobo HD and it works like a charm!


Go to Top of Page

ernst-dieter
Falchetto

Germany
199 Posts

Posted - 12/03/2020 :  08:08:06  Show Profile  Reply with Quote
Thanks ... can not see the appended picture
Sorry, seems related to my installation

Edited by - ernst-dieter on 12/03/2020 09:47:53
Go to Top of Page

ernst-dieter
Falchetto

Germany
199 Posts

Posted - 12/03/2020 :  08:10:30  Show Profile  Reply with Quote
Which voltage level is to apply? (3,3V?)

Edited by - ernst-dieter on 12/03/2020 09:48:57
Go to Top of Page

falchettogiallo
Pulcino

Italy
27 Posts

Posted - 12/03/2020 :  12:19:01  Show Profile  Reply with Quote
quote:
Originally posted by ernst-dieter

Which voltage level is to apply? (3,3V?)



Yes, signals levels are 3,3
Go to Top of Page

Andrew Mogg
Pulcino

Germany
27 Posts

Posted - 23/03/2020 :  22:27:18  Show Profile  Reply with Quote
I am now trying to connect a Bluefly to the Clara. I managed to change the baudrate as mentioned in this post. I connected the tx to rx, rx to tx, GND and VCC. When I turn on the Kobo I am able to turn on the Bluefly, but I cant find the port /dev/ttyACMO. When I enter device set up>device configuration> terminal I get a No Data. What am I missing? Any ideas?
Go to Top of Page

bambuko
Aquilotto

United Kingdom
201 Posts

Posted - 23/03/2020 :  23:11:05  Show Profile  Reply with Quote
on my Clara in Device configuration it is:
Name- BlueFlyVario
Port- /dev/ttymxc0
Baudrate- 115200 8bit
Go to Top of Page
Page: of 2 Previous Topic Topic Next Topic  
Previous Page
 New Topic  Reply to Topic
Jump To:
PostFrontal Forum © PostFrontal - La community del Volo a Vela Go To Top Of Page
This page was generated in 0.36 seconds. Snitz Forums 2000

Suggerimenti dello staff:

                                         

Note legali (italiano):
Privacy Policy Cookie Policy
Legal notice (english):
Privacy Policy Cookie Policy

PostFrontal S.A.S. di Giuliano Golfieri & c. - P.I. 05264240960