Author |
Topic |
|
Flake
New Entry
4 Posts |
Posted - 12/04/2017 : 13:49:34
|
Hello,
are there any experiences with using LK8000 on an Oudie in combination with an EOS? Can anyone help with how to connect the devices so I e.g. can declare tasks in LK8000 to generate the input for the EOS?
Thanks Flake |
|
rflantua
Pulcino
Netherlands
33 Posts |
Posted - 08/05/2017 : 22:18:51
|
Hi Flake,
I have an EOS and a Oudi2 running LK8000. Some functions are working perfectly, other not...or I haven't found the right way. Flarm data is sent without problems (use the correct bautrate) Power is supplied MC data is transfered Ballast data is transfered These work both ways! But I haven't found a way to declare a tasks in LK and sent it to the EOS. Personally I don't mind and I take the double work without problems. But I agree, this should work. Maybe one of the other genious on this forum have a good suggestion?
Sorry not being able to help you any further.
Regards, Rob |
Rob Flantua DG-800B 18m D-KEDI (RF) |
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 09/05/2017 : 01:20:51
|
We don't have Lx EOS hardware to work on, so there is no support.
|
Edited by - Coolwind on 09/05/2017 01:21:53 |
|
|
Flake
New Entry
4 Posts |
Posted - 18/10/2017 : 22:17:38
|
Hi Rob,
can you tell me all the settings you used for the connection?
Cheers Thiemo
quote: Originally posted by rflantua
Hi Flake,
I have an EOS and a Oudi2 running LK8000. Some functions are working perfectly, other not...or I haven't found the right way. Flarm data is sent without problems (use the correct bautrate) Power is supplied MC data is transfered Ballast data is transfered These work both ways! But I haven't found a way to declare a tasks in LK and sent it to the EOS. Personally I don't mind and I take the double work without problems. But I agree, this should work. Maybe one of the other genious on this forum have a good suggestion?
Sorry not being able to help you any further.
Regards, Rob
|
|
|
rflantua
Pulcino
Netherlands
33 Posts |
Posted - 24/01/2018 : 21:13:22
|
Hi Flake,
Sorry I missed our question. Is it still relevant? What do you want to know?
Regards, Rob |
Rob Flantua DG-800B 18m D-KEDI (RF) |
|
|
Flake
New Entry
4 Posts |
Posted - 25/01/2018 : 10:18:41
|
Hey, yes, it is still relevant.
I want to know everything I have to be aware of when setting up my System so I can use most of the functions. MC and balast transfer does not work on my set up as well....
Thanks Flake |
|
|
AlphaLima
Moderator
Germany
1978 Posts |
Posted - 28/01/2018 : 19:10:11
|
The EOS uses the LX16xx NMEA Commands. You must use the LX16xx driver. |
|
|
Flake
New Entry
4 Posts |
Posted - 28/01/2018 : 19:42:15
|
Thank you, I will try it at the next opportunity! |
|
|
|
Topic |
|