PostFrontal Forum
PostFrontal Forum
PF Home | International_Forum | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?


 All Forums
 LK8000 International Support
 Development Updates
 LX Colibri and LX Nano declaration supported!
 New Topic  Reply to Topic
Author Previous Topic Topic Next Topic  

Coolwind
Moderator

Italy
8957 Posts

Posted - 13/02/2011 :  23:18:47  Show Profile  Visit Coolwind's Homepage  Reply with Quote
Thank to Richard, these two devices (Colibri is widely used !) are now supported for task declaration within LK8000.

All people using Colibris should thank him!!!!

2xa
Pulcino

Sweden
18 Posts

Posted - 14/02/2011 :  16:59:04  Show Profile  Reply with Quote
Thank you very much. This will simplify the life for many glider pilots. (No need for using a different SW for downloading the task).
Go to Top of Page

AlphaLima
Moderator

Germany
1973 Posts

Posted - 14/02/2011 :  22:43:50  Show Profile  Visit AlphaLima's Homepage  Reply with Quote
Does that also mean, that LX5000, LX7000,... Task declaration is also supported?
This would be great!
Go to Top of Page

peclik
Pulcino

Czech Republic
63 Posts

Posted - 15/02/2011 :  09:25:02  Show Profile  Reply with Quote
As far as I know, the protocol should be compatible with LX Colibri, Nano and Posigraph.
I don't know about the others. Maybe you can ask LX directly (and tell us the asnwer :).

Or you can try, but there is some risk of breaking electronic seal (again I don't know about the LX5000..., but Colibri can be quite easily broken by improper data sent to it).

Also help for me could be sending me communication sniffed from serial line when declaring to the device from other SW.

Edited by - peclik on 15/02/2011 09:30:15
Go to Top of Page

dgtrecentowl
Aquila imperiale

Italy
633 Posts

Posted - 26/02/2011 :  19:28:41  Show Profile  Reply with Quote
I confirm
Does not work with LX5000 and LX7007

Hi
Mino
Go to Top of Page

peclik
Pulcino

Czech Republic
63 Posts

Posted - 27/02/2011 :  00:03:18  Show Profile  Reply with Quote
quote:
Does not work with LX5000 and LX7007


You can try again with next LK version. In 2.1c the declaration is not working even for Colibri/Nano when sending from PDA/PNA.
Go to Top of Page

Allan Broadribb
Aquilotto

USA
235 Posts

Posted - 01/03/2011 :  23:36:37  Show Profile  Reply with Quote
Is the task declaration working with the Nano? Allan.
Go to Top of Page

peclik
Pulcino

Czech Republic
63 Posts

Posted - 02/03/2011 :  09:27:07  Show Profile  Reply with Quote
Wait for 2.1d, please. 2.1c is not working.
Go to Top of Page

rimaroc88
Falchetto

102 Posts

Posted - 02/03/2011 :  19:50:31  Show Profile  Reply with Quote
any body tried with LX red box?
Go to Top of Page

AlphaLima
Moderator

Germany
1973 Posts

Posted - 02/03/2011 :  20:25:13  Show Profile  Visit AlphaLima's Homepage  Reply with Quote
Isn't the redbox 100% FLARM compatible?
Go to Top of Page

Coolwind
Moderator

Italy
8957 Posts

Posted - 11/03/2011 :  01:02:27  Show Profile  Visit Coolwind's Homepage  Reply with Quote
Today we had confirmation about Nano and Colibri. 2.1d is correctly declaring tasks to them.
Thanks Richard!
Go to Top of Page

JefYP
Pulcino

12 Posts

Posted - 11/03/2011 :  12:14:15  Show Profile  Reply with Quote
Checked the declaration of 2.1d with Posigraph and LX20 connected via glidertools USB converter to Ipaq314. It does not work. The same hardware config with other declaration software works OK on both loggers.
Kind regards, Jef
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
Jump To:
PostFrontal Forum © PostFrontal - La community del Volo a Vela Go To Top Of Page
This page was generated in 0.22 seconds. Snitz Forums 2000

Suggerimenti dello staff:

                                         

Note legali (italiano):
Privacy Policy Cookie Policy


PostFrontal S.A.S. di Giuliano Golfieri & c. - P.I. 05264240960