T O P I C R E V I E W |
giancarlo |
Posted - 20/12/2010 : 13:31:49 Ho visto u alcuni alianti che la posizione dei flap viene visualizzata sul cruscotto un dei led colorati. Qualcuno č in grado di dirmi se č possibile realizzare "artigianalmente" questo sitema di visualizzazione? Grazie Gaincarlo |
5 L A T E S T R E P L I E S (Newest First) |
Lukes |
Posted - 31/05/2012 : 09:30:46 quote: Originally posted by giancarlo
Grazie, proverņ a mandare una mail alla S.H.
Forse ti conviene fartelo .... Il rilevamento della posizione viene fatto con dei piccoli magnetini posizionati agli stop della leva flap (o altro comando). In internet di certo qualcosa trovi |
Lukes |
Posted - 31/05/2012 : 09:29:32 Leds draw less current. The voltage depends on the led type. What voltage do you read at the connection you have ? Then just chose a led, with the appropriate voltage, that blinks (some types of leds blink) and connect it there. If the voltage you have is too high, you will need a resistor as well. |
LinwoodKellon |
Posted - 31/05/2012 : 09:02:44 Hi, wondering if i Can I hook Up or tap a led strip to The Security Doorlight to blink with the Alarm? I know leds draw way less voltage but I Just want to be safe and not short something out? Any Ideas
http://www.ledstrips8.com/ |
giancarlo |
Posted - 20/12/2010 : 15:55:53 Grazie, proverņ a mandare una mail alla S.H.
|
AlbertOne |
Posted - 20/12/2010 : 15:18:53 su gli SH c'č anche una opzione che ti indica con un piccolo schermo LCD (-1; oppure +1) la posizione del Flap... mi pare che lo trovi in vendita in germania...meglio che farselo artigianalmente (hai bisogno degli interruttori su ogni posizione flap...)
Alberto |