T O P I C R E V I E W |
Bubu |
Posted - 20/04/2023 : 17:47:20 Hi I use a kobo Glo + Blueflyvario with version 7 of Lk8000 that I just installed. The GPS connection is not made. Someone would have any idea My Settings:
Name: Blueflyvario Port: /dev/ttymxc0 - 8 bit States: No display Geoid Management: On Serial link mode: Normal GPS model: Generic
I'm French and I use google trad for English. Thanks in advance Bubu |
5 L A T E S T R E P L I E S (Newest First) |
Bubu |
Posted - 22/04/2023 : 19:30:02 Merci Bruno, mon mail a changé, c'est reynald@riseup.net |
brunotl |
Posted - 21/04/2023 : 16:54:08 I confirme Wiring must be : TX <-> RX RX <-> TX 5V <-> 5V GND <-> BND
port config must be : /dev/ttymxc0 - 115200bps - 8 bit
PS : support possible en Français par mail ( je t'ai envoyé un message privé hier ) |
Bubu |
Posted - 21/04/2023 : 14:56:04 Hi, I have rechecked the welds and they are correct. It is necessary to weld the Rx on Tx and vice versa. THANKS |
brunotl |
Posted - 20/04/2023 : 18:21:08 config look good, maybe a wiring problem ? |
Bubu |
Posted - 20/04/2023 : 17:51:36 It s the 7.4.2 version. |