T O P I C R E V I E W |
evanspj |
Posted - 29/12/2022 : 11:21:57 Hello everyone,
I have paired the BlueFly vario with my Android phone using Bluetooth.
When I go to Device Setup (CONFIG 2/3 > LK8000 SETUP > DEVICE SETUP)
I click Device B and can set the name to BlueFlyVario but I don't know what other settings I need to use.
Can someone please help me. Peter Evans |
6 L A T E S T R E P L I E S (Newest First) |
evanspj |
Posted - 24/01/2023 : 08:17:41 Thanks brunotl. I can now get 1 step closer.
I have downloaded the latest version 7.4.1 and can now select "Name" : Select "BlueFlyVario" "Port" : Select "BT_SPP:BlueFlyVario-XXXX" ( XXXX depends of your device ...)
BUT this is as far as I can get ... if I click terminal I don't see any data flowing back and forth. What else do I need to set? Status: remains empty Serial mode: is set to Normal Device Model" is set to Generic |
brunotl |
Posted - 18/01/2023 : 13:56:42 1 - you need to pair blueflyvario with your phone using android settings ( look for your phone manual to know how to do it )
2 - in LK8000 "System Setup" -> "Device Config" "Name" : Select "BlueFlyVario" "Port" : Select "BT_SPP:BlueFlyVario-XXXX" ( XXXX depends of your device ...)
|
evanspj |
Posted - 18/01/2023 : 08:49:41 Hi, Could someone please post all the instructions for connecting the BlueFly Vario to LK8000. Thanks in advance, Peter |
brunotl |
Posted - 30/12/2022 : 12:26:23 in "Port" you would have an entry named like "BT:BlueflyVario-XYZ" or "BT_SPP:BlueflyVario-XYZ", select it ...
of course bluetooth (and location on recent android version) must be Enabled in android settings. |
evanspj |
Posted - 29/12/2022 : 23:15:22 quote: Originally posted by brunotl
you also need to select "port" where your bluefly is connected, it should be named like "BT_SPP:XXXXXx"
Thanks for replying so quickly.
I think I am missing something.
* I have paired the BlueFly vario with my Android phone using Bluetooth.
* When I go to Device Setup (CONFIG 2/3 > LK8000 SETUP > DEVICE SETUP) and I click Device B and
** set the name to BlueFlyVario ... what other settings do I need: **PORT: TCPServer or Bluetooth Server or something else **Port: I am only enter numbers
When looking at Device A and clicking TERMINAL I can see that LK8000 is receiving data about every second. But if I look at Device B I do not see any data being received.
What am I missing, Peter Evans
|
brunotl |
Posted - 29/12/2022 : 16:17:59 you also need to select "port" where your bluefly is connected, it should be named like "BT_SPP:XXXXXx" |