PostFrontal Forum
PostFrontal Forum
LK8000_Support_Forum | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 LK8000 International Support
 Hardware
 kobo Clara HD

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

 
   

T O P I C    R E V I E W
bambuko Posted - 29/05/2018 : 16:11:23
For the fans of Kobo.
New HD 6" screen:
https://us.kobobooks.com/collections/ereaders/products/kobo-clara-hd

sounds promising...?
15   L A T E S T    R E P L I E S    (Newest First)
bambuko Posted - 23/03/2020 : 23:11:05
on my Clara in Device configuration it is:
Name- BlueFlyVario
Port- /dev/ttymxc0
Baudrate- 115200 8bit
Andrew Mogg Posted - 23/03/2020 : 22:27:18
I am now trying to connect a Bluefly to the Clara. I managed to change the baudrate as mentioned in this post. I connected the tx to rx, rx to tx, GND and VCC. When I turn on the Kobo I am able to turn on the Bluefly, but I cant find the port /dev/ttyACMO. When I enter device set up>device configuration> terminal I get a No Data. What am I missing? Any ideas?
falchettogiallo Posted - 12/03/2020 : 12:19:01
quote:
Originally posted by ernst-dieter

Which voltage level is to apply? (3,3V?)



Yes, signals levels are 3,3
ernst-dieter Posted - 12/03/2020 : 08:10:30
Which voltage level is to apply? (3,3V?)
ernst-dieter Posted - 12/03/2020 : 08:08:06
Thanks ... can not see the appended picture
Sorry, seems related to my installation
falchettogiallo Posted - 11/03/2020 : 14:36:45
quote:
Originally posted by ernst-dieter

I have already tried the 7.1l-otg-kernel experimentally on the Clara HD. All seems to be fine (handling, graphics etc.) EXCEPT that there is no suitable serial port to connect to. A lot of serial ports are showing up but no one with an attractive name similar to ttyUSB0. A lonely ttymxc0 port can be connected without error but does not transmit anything from my S80. Any hope?



You could connect directly to the ttymxc0 pins on the Clara motherboard. I've done something similar on my Kobo HD and it works like a charm!


ernst-dieter Posted - 07/03/2020 : 18:21:57
Don't hide your light under a bushel.
brunotl Posted - 07/03/2020 : 17:55:42
i've tried to make a otg kernel but without success, that seems out of my skill...
ernst-dieter Posted - 07/03/2020 : 17:49:33
O.k. Bruno, but not principially ?
brunotl Posted - 07/03/2020 : 17:47:23
USB otg is not supported on Clara HD. sorry.
ernst-dieter Posted - 07/03/2020 : 16:51:52
I have already tried the 7.1l-otg-kernel experimentally on the Clara HD. All seems to be fine (handling, graphics etc.) EXCEPT that there is no suitable serial port to connect to. A lot of serial ports are showing up but no one with an attractive name similar to ttyUSB0. A lonely ttymxc0 port can be connected without error but does not transmit anything from my S80. Any hope?
ernst-dieter Posted - 07/03/2020 : 16:08:50
Same question ... as my Glow HD is fading out. Clara HD would be the candidate next to
Andrew Mogg Posted - 11/08/2019 : 14:40:49
Has there been any progress on the Clara as far as OTG and/or LKNet goes?
villamany Posted - 15/01/2019 : 14:38:09
Testing a new Clara HD unit and seems to works fine like on the Aura 2ed!
On the Clara HD a little better resolution but you need to get booth at the same time for acuse it. Also more free RAM on the Clara.
villamany Posted - 05/01/2019 : 11:41:53
Thanks, but finally seems to be a defective touch screen. So i will try a new unit.

PostFrontal Forum © PostFrontal - La community del Volo a Vela Go To Top Of Page
This page was generated in 0.1 seconds. Snitz Forums 2000

Since 2006, owned and maintained by PostFrontal S.A.S. di Giuliano Golfieri & c. - VAT ID: IT05264240960
THIS WEBSITE ONLY USES FUNCTIONAL COOKIES
Privacy & Cookie Policy