T O P I C R E V I E W |
makerley |
Posted - 14/08/2018 : 00:30:53 In using 6.1r is it possible (when connected to a flarm source) to keep traffic on map enabled, but disable the flarm radar multimap?
Thanks for any advice, Mark |
4 L A T E S T R E P L I E S (Newest First) |
Aeronemo |
Posted - 29/05/2020 : 16:56:52 Hi, I can see no more friends on maps (friends from livetrack24). All are correctly define: live track works and "traffic on map" is enabble. I don't know if problem come from version > 7 of Lk8000 or from livetrack24 server.
|
AlphaLima |
Posted - 16/01/2019 : 08:51:40 Done, for next version. |
makerley |
Posted - 14/08/2018 : 23:58:01 Thanks Daniel, I reached the same conclusion. Perhaps I'll put in a change request to be able to disable multimap 5 |
danielvelez |
Posted - 14/08/2018 : 05:12:28 Hello Makerley.
Iīm testing 6.1r with an Airwhere device (FLARM Signal output). On Menu 10, Configure Multimaps, thereīs only 4 multimaps enable/disable options. Flarm radar is on Multimap 5. So thereīs no "disable" function. Also Iīve read somewhere (probably manual for ver 6) that you canīt disable the Flarm multimap, and that it comes out only when a FLARM is detected, or also if you set a "screen button" to activate FLARM.
So my guess is that you canīt disable flarm radar. And traffic on map is only to show the flarm signals on the map screen but not to show the flarm signals on the flarm radar.
|