T O P I C R E V I E W |
lk2cloud |
Posted - 18/09/2017 : 13:40:05 Hallo,
i have a Kobo Glo with a GlobalTop GPS PA6H connected to serial port. All works fine. Only in competition when i define a task with a timegate the task is never started. In simulation mode it works perfectly. I found an issue about it on this site https://github.com/LK8000/LK8000/issues/891 I tried a lot of things, i think the problem is the Hardware.
best regards Wieland |
6 L A T E S T R E P L I E S (Newest First) |
brunotl |
Posted - 08/01/2020 : 20:40:30 I think yes, in version >= 7.1e |
sundancer |
Posted - 08/01/2020 : 14:52:51 Have this issue been fixes? Because on some Kobos with updated system my friends still have this problem. |
Coolwind |
Posted - 19/09/2017 : 15:40:56 It is a simple patch. |
lk2cloud |
Posted - 19/09/2017 : 15:07:58 There is other simple way to do: Start kobo, wait until you think GPS has fix and than start LK8000. This works for me good so nothing else to do. |
Coolwind |
Posted - 19/09/2017 : 14:23:49 We can fix this glitch. First nmea time stamp should be skipped if 00. But normally we check the valid date : this mean that your gps is faulty when sending out that time claiming it to be very true. Anyway, we shall not hold valid a first time fix with 0. |
lk2cloud |
Posted - 19/09/2017 : 12:15:53 So i have tried a lot of things and found out something: When i start Kobo the NMEA output starts with time 00h 00m 00s. When GPS has the first fix time is updated to the actual time. When i disable the GPS in configuration, turn Kobo off, turn Kobo on and wait until i think GPS has fix then go to configuration and enable gps again (Generic) it works ! Timegates and all is ok now ! So i will try if it is better when i take the backup power of the GPS to the Vbat.
|