| Author |
 Topic  |
|
Coolwind
Moderator
Italy
7511 Posts |
 Posted - 11/06/2012 : 00:43:40
|
If the connector's wires also include the pins for GPIO 1-4 , I promise I will add support for them as hardware custom keys: customkeys bottom left, bottom center, bottomright and bottom icon will also be mapped to gpio 1-4 (hardware buttons), to allow remote controls or keypad.
I already tested this solution, and personally I already bought all the necessary hardware to do it. I missed only the cannibalized cradle specs.
|
 |
|
|
mazuk
Falchetto
Germany
117 Posts |
|
|
mazuk
Falchetto
Germany
117 Posts |
Posted - 13/06/2012 : 15:35:36
|
So my setup is ready now.
No more bulcky cradle :-)
Here the 61cs with the GT-Altimeter attached to my tiny adapter. It is working perfectly now.
ciao
Mazuk |
|
|
|
hpronto
Pulcino
Portugal
22 Posts |
Posted - 13/06/2012 : 16:11:59
|
Hi Mazuk, nice work!
Tell me, are the holes (were the cradle fits) meant to take screws like that?
cheers,
Hugo |
|
|
|
mazuk
Falchetto
Germany
117 Posts |
Posted - 13/06/2012 : 16:25:27
|
Yes the holes are the same just inserted threads. (don't know the english word for this may be thread inserts )
No need for drilling. And as you can see I left one insert more out to prevent a rotation of the adapter !
 |
|
|
|
hpronto
Pulcino
Portugal
22 Posts |
Posted - 13/06/2012 : 16:38:41
|
Great, but how do you hold the thread-inserts-piece to the 61CS holes? Glue?
Thanks!
HUgo |
|
|
|
mazuk
Falchetto
Germany
117 Posts |
Posted - 13/06/2012 : 17:03:10
|
No you can just screw the thread inserts:
|
|
|
|
hpronto
Pulcino
Portugal
22 Posts |
Posted - 13/06/2012 : 17:05:46
|
Chrystal clear!
Many thanks Mazuk!
Hugo |
|
|
|
rotor
Pulcino
59 Posts |
Posted - 13/06/2012 : 17:45:11
|
Hi Mazuk,
You did a great job!
Can you give information about the inner and outer diameter of these threads and maybe a wiring diagram of the pogo-connector and the female mini-USB connector? (please specify front and back row)
Regards, Nico
|
|
|
|
mazuk
Falchetto
Germany
117 Posts |
Posted - 13/06/2012 : 18:01:28
|
Nico,
for the inner you have a M3 thread.
Outer diameter bottom 4.3mm top 4.8mm
The pin layout if you look to the 61cs with display up are:
The mini USB wires:
green to RXD
white to TXD
red to DCIN
black to GND
Ciao
Mazuk |
|
|
|
rotor
Pulcino
59 Posts |
Posted - 13/06/2012 : 19:28:52
|
| Thanks! |
|
|
|
wolf_pg
Falchetto
Czech Republic
158 Posts |
|
|
Topic |
|
Request info about: GT altimeter and 61CS
