quote:

---

Originally posted by GliderTools

Fri, 28 Jan 2011 00:09 UTC

BASIC UNLOCK DOWNLOAD: (Updated Sat, 30th October 2010, 23:00)
http://store.glidertools.com/M400_LK8000_UNLOCK.ZIP

UPDATE TO v. 2.x DOWNLOAD: (Fri, 28 Jan 2011 00:09 UTC)
http://store.glidertools.com/m400_lk8000_2.x.zip

Hello friends!

Today I release first final version of MIO400 unlock, designed for use with LK8000.
Original MioMap navigation can continue to use unchanged.

Main unlock page:


Settings page:



Instalation:
1) Backup your original file \My Flash Disk\Program Files\MioMap\appstartupsec.ini
2) Expand unlock to the root of the flash drive. Unlock includes LK8000 version 1.22b. If you want to use another version, simply replace the files in a subdirectory LK8000

Some details:
1) To MioMap menu is added "exit" button (page 2 of menu). When using MioMap, you can press this button to exit MioMap, and return to the unlock main screen.
2) The brightness adjusting of the MioMap affects the entire device. I recommend, therefore, adjust the brightness in MioMap to the highest level for the best visibility LK8000 in direct light.
3) After installing this unlock, no longer will be automatically run "connect screen", when you connect the USB cable. This allows seamless on-board power supply your unit via any USB cable.
If you want to connect your device to computer as MassStorage, click on the main screen to button USB first. This starts ConnectScreen, and you can then connect the USB cable. Sometimes that does not work, and the connection fails. When this happens, connect the USB cable first, then turn off the device into the reset position, wait a few seconds and then switch on again.
4)Serial port for connecting internal GPS unit is COM2, 9600 baud. To connect the logger or Flarm we use port COM1, but for that you will need a converter from RS232 to USB.
http://www.glidertools.com/news/rs-232-o-usb-converter-with-12-5v-switching-power-supply/
Work on the production of the converter is already underway, but it takes a few days, I have to wait for the spare capacity in the SMD assembly machine. The contract is small, and not interesting for manufacturer.



BASIC UNLOCK DOWNLOAD: (Updated Sat, 30th October 2010, 23:00)
http://store.glidertools.com/M400_LK8000_UNLOCK.ZIP

UPDATE TO v. 2.x DOWNLOAD: (Fri, 28 Jan 2011 00:09 UTC)
http://store.glidertools.com/m400_lk8000_2.x.zip

Send me please your suggestions what could be improved.

Vladimir

---

quote:

---

Unlock includes LK8000 version 1.22b. If you want to use another version, simply replace the files in a subdirectory LK8000

---