PostFrontal Forum
PostFrontal Forum
PF Home | International_Forum | Profile | Register | Active Topics | Members | Search | FAQ | Upload image
Save Password
Forgot your Password?

 All Forums
 LK8000 International Support
 General Support
 LXNav S100 - LK8000 task Declaration failed
 New Topic  Reply to Topic
Author Previous Topic Topic Next Topic  


9 Posts

Posted - 12/10/2017 :  13:01:09  Show Profile  Reply with Quote
I tested the LXNav S100 linked via BT to LK8000 installed on Naviter Oudie forn a while.
BT link works perfectly: the link is bi-directional (i can change MC, ballast, etc from both); i can see flarm traffic and get baro altitude as well.

i tryed all the LX drivers (like LXV7_xxx, LX16xx, etx) but after declaring the task, appears the message "logger not found"

i did tryed to link S100 to TopHat installed on my mobile (android version) using LXNAV standard driver and i can declare the task with easy.

is there a way to solve the declaration issue?



1389 Posts

Posted - 12/10/2017 :  21:43:31  Show Profile  Visit AlphaLima's Homepage  Reply with Quote
This works for FLARM declarations only.
Make sure all are working on the same baudrate.
Does the declaration work if you set the S100 into bypass mode manualy?

If you use a different logger, you may try using Port sharing. Meaning activate the logger driver on another device but with the same port.

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
Jump To:
PostFrontal Forum © PostFrontal - La community del Volo a Vela Go To Top Of Page
This page was generated in 0.37 seconds. Snitz Forums 2000

Suggerimenti dello staff:


PostFrontal S.A.S. di Giuliano Golfieri & c. - P.I. 05264240960