| Author |
 Topic  |
|
|
volpe caterina
Pulcino
Italy
60 Posts |
 Posted - 18/03/2012 : 19:26:22
|
Hi
When I used a DSX device It was very easy to create and declare a task from both a MIO400 or an Ipaq device onto the logger.
Now I found it impossible to connect in the same way my MIO400 with the LX 7007 pro IGC.
I mean that the connection between the MIO and LX works well for navigation purposes, but I cannot declare a task because the LX is not recognized.
Any suggestion? Does Lk 8000 support Lx 7007? |
Victor-XRay |
|
|
AlphaLima
Moderator
Germany
826 Posts |
Posted - 18/03/2012 : 22:39:15
|
Yes, the LX7007 is supported, but Task declaration was never tested due to a lack of documentation and Hardware.
Which driver are you using ( LX, LX16xx or LX Colibri)?
For task declaration you may switch to LX Colibri. |
Edited by - AlphaLima on 18/03/2012 22:42:37 |
 |
|
|
volpe caterina
Pulcino
Italy
60 Posts |
Posted - 20/03/2012 : 12:15:27
|
| Thanks for the suggestion. I was using LX driver: I will try LX Colibri and I'll report back |
Victor-XRay |
|
|
|
volpe caterina
Pulcino
Italy
60 Posts |
Posted - 03/04/2012 : 16:42:35
|
I have tried the Colibri driver. This is the result: LX 7007 shows that the connection is in place. The LK8000 shows that the task was declared correctly but..... no evidence of the task in LX 7007.
What could be wrong? |
Victor-XRay |
|
|
|
AlphaLima
Moderator
Germany
826 Posts |
Posted - 03/04/2012 : 18:53:06
|
What do you mean with: "no evidence"?
Are you aware that logger Task and the displayed task in the LX7007 are two different things?
If the Task declaration was correctly I suspect the logger Task is OK.
|
Edited by - AlphaLima on 03/04/2012 18:55:07 |
|
|
|
Pup
Pulcino
Czech Republic
14 Posts |
Posted - 11/04/2012 : 11:21:14
|
| As AlphaLima mentions, declaration has nothing to do with the tasks stored in LX7007. As you most likely want your LX to follow your task, the question is not how to declare, but how to get tasks from LK to LX - having tasks in LX, you just need a couple of button clicks to declare a task. To be honest, I build the tasks in PNA using unlicensed mCU, then copy them to LX with ConnectMe. This makes me to build the tasks twice, but still less work to do it in mCU than in LX7007 itself. |
|
|
| |
Topic |
|
LK8000 and LX 7007 pro IGC