Is it possible to create an additional NOTAM activated airspace page in LK8000? The existing airspace filter is "OK" but time-consuming.
This is what I have in mind:
- All NOTAM activated areas must be stored in a separate airspace file. - The areas must be sorted by airspace classification (AC R and Q) and displayed separately. - Each area must be turned on by simply selecting ON. - An additional classification (AC NOTAM) might be useful.
So what you can do either define all your Notam airspaces as own airspace type (e.G.Wave). Then you can globaly en-/disable all together via the Filte type. or you must en-/disable each Notam airspace separatly (thats what NOTAMS are about!). Please be aware, that you can store these modifications persistently for your next fly on Setup Page 2 "Airspace Changes"
I use a printed NOTAM-briefing and check the NOTAM areas one by one. If necessary I make my own airspacefile in OpenAir-format. The airspacefilter is very time-consuming because of the many actions to turn an area on/off (enable/disable).
As I said before, the airspace filter is "OK" but maybe the search function can be simplified by adding an extra classification.
Therefore the following proposal: add the classification NOTAM. All the NOTAM activated airspace can be included in this. These are still listed under Restricted or Danger classification and are the cause that one has to scroll through long lists to find an area (for example: I have the Dutch and German airspace in LK8000 and this provides a fairly long list of Restricted and Danger areas).
I understand that people want to limit the number of classifications, but I think that this addition can be very useful. Extra classifications that are not actually required are now also mentioned, such as: Wave and GliderSector but also CTR (this is actually classification C or D).
I would really appreciate it if this can be implemented.