| Author |
 Topic  |
|
|
Marco from Hangar 5
Pterodattilo
Netherlands
886 Posts |
 Posted - 13/05/2018 : 12:20:59
|
Hi all,
I have two way communication with the LXNAV S80, I can manually set the Mc value in LK8000 and then it changes on the S80 and visa versa.
But where I was hoping for was that the automatic Mc value of LK8000 would be transfered to the S80 as well, so there is no need for manipulating the Mc values at all.. I find the Thermal+finish setting for Auto Mc a very handy feature of LK8000.
But when I manually set the value of the LK8000 auto setting, into the S80, the auto mode in Lk8000 is turned off because it receives the setting from the S80.. which I understand of course.. I can set the Mc value to auto mode again, no problem, but now everytime I like to have the S80 to be adjusted, I need to do quite a bit of fiddling on both the S80 and LK8000 to turn it back to auto..which I think can be avoided completely if the S80 could receive the value automatically.
Why isn't it possible to have LK8000 automatically adjust the S80? was this a policy decision? Or should I set it somewhere in LK8000 (searched for it but could not find it) or should I change the driver for that? (I use LXV7_EXP)
I will post a change request for this as well.
Runtime log in this link:
https://1drv.ms/u/s!AlwrQ7WFtxp_qATvzwZi1iRopn1-
Thanks much! |
Marco
BU (PH-588)
Mini Nimbus HS7, s/n 039
http://www.zweef.nl/
Zweefvliegcentrum Noordkop, NETHERLANDS |
Edited by - AlphaLima on 15/05/2018 19:43:23 |
|
|
AlphaLima
Moderator
Germany
1978 Posts |
|
|
Marco from Hangar 5
Pterodattilo
Netherlands
886 Posts |
Posted - 22/05/2019 : 17:35:25
|
Hi Alphalime,
I have flown with LK8000 Android version 7.0 about 2 weeks ago, but LK8000 AutoMcready did to transfer to the S80 vario, should I select another driver? (LX7_EXP right now).
I will fly with LK8000 7.1 Beta tomorrow, maybe it works with that version... Will keep you posted.
Thanks!
|
Marco
BU (PH-588)
Mini Nimbus HS7, s/n 039
http://www.zweef.nl/
Zweefvliegcentrum Noordkop, NETHERLANDS |
 |
|
| |
Topic |
|
|
|
BUG Auto Mc LK8000 not transfered (FIXED)
