Author |
Topic |
Aleksandar
Falchetto
Yugoslavia
167 Posts |
Posted - 29/05/2016 : 21:03:59
|
Is it general problem on the Kobo when program stay on the ground with no moving. I use Kobo with blue fly vario and when I put device on the ground with out shut down first Blue fly vario go to the sleep and after 5 minits I can wake up screen and turn blue fly vario and that is ok, if I stay 30 minutes on kobo screen stay frozen and I cant do nothing. I must reset with power button. and again turn on? |
Best regards, Aleksandar Cirkovic |
Edited by - Coolwind on 30/05/2016 15:42:20 |
|
mzeddd
Pulcino
Russia
82 Posts |
Posted - 29/05/2016 : 21:27:25
|
Agree. Today after 2h in the air. Once I landed I found that I menu button is not reacting. After some taps on the screen LK started to react with zoom in/out but MENU was not accessible still.
I did not cut the power, just let KOBO run till I pack my staff and after 5 minutes it was back running fine. |
Edited by - mzeddd on 29/05/2016 21:50:00 |
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 30/05/2016 : 01:42:07
|
mzedd what gps were you using? Blue Fly? |
|
|
mzeddd
Pulcino
Russia
82 Posts |
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 30/05/2016 : 15:42:08
|
I am afraid it is an hardware issue, discussed also in another thread. I will not open a bug for hardware .. so I move this discussion to general support. |
|
|
Aleksandar
Falchetto
Yugoslavia
167 Posts |
Posted - 30/05/2016 : 17:27:04
|
I think. For Kobo is problem when is too small value in the Task Rule. Start max height 1-5 meter and small start Radius :)
Frozen screen happen when GPS lost and when LK8000 work com port restart :( |
Best regards, Aleksandar Cirkovic |
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 30/05/2016 : 17:50:08
|
During com port restart, lasting a few seconds, in FLY mode LK is on hold. Com port restart = wait. If GPS data is lost (no gps signal, no data, very different from invalid fix) you have a problem because in FLY mode LK works only with a GPS giving a time. In this case, com port reset happens after about 40 seconds.
I try to set 3m max height in start task rules but nothing strange happens. What is the problem?
|
|
|
Aleksandar
Falchetto
Yugoslavia
167 Posts |
Posted - 30/05/2016 : 20:50:11
|
IGC backup is on the address video.paraglidingserbia.com
28.05.2016 I am install T version and LK8000 work like a drunk in the 4 flight he is frozen screen and IGC log name is LOST Very thermal activities flight. On the end of the day one soaring one short flight is OK. Always when he is been frozen on the screen is task WP message. Delete WP, Move WP ... 29.06 I flight with S version and in the flight all is OK only when I dont shut down LK8000 after flight and 30 minutes screen is frozen and I must to rebot him :) All track is OK. Today I am install new fresh T version and tomorrow I am on the hills and I will testing him again in the flight. Today I am testing him on the ground and one time when he record track he is frozen when I am stay 3 hours. After that I am testing him without track with GPS source 1 hours and he is not frozen. Tomorrow I will inform you :)
|
Best regards, Aleksandar Cirkovic |
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 30/05/2016 : 21:58:29
|
Well the only difference reasonably between version S and version T is that on the new version we are redirecting error messages on a file called LK8000/kobo/error.log . But, normally we dont have any message. Can you check?
|
|
|
Aleksandar
Falchetto
Yugoslavia
167 Posts |
Posted - 30/05/2016 : 22:22:29
|
terminate called after throwing an instance of 'Poco::SystemException' what(): System exception Aborted (core dumped)
|
Best regards, Aleksandar Cirkovic |
|
|
brunotl
Pterodattilo
France
1097 Posts |
Posted - 31/05/2016 : 11:48:09
|
quote: Originally posted by Aleksandar
terminate called after throwing an instance of 'Poco::SystemException' what(): System exception Aborted (core dumped)
can you check if "NMEA checksum" is enabled in device config ?
can you send all contents of directory "/LK8000/kobo" ? |
|
|
Aleksandar
Falchetto
Yugoslavia
167 Posts |
Posted - 31/05/2016 : 21:10:27
|
Ok I will send you all folder in the two or three days today I am forgot my copit in the house on the hill :( |
Best regards, Aleksandar Cirkovic |
|
|
mzeddd
Pulcino
Russia
82 Posts |
Posted - 03/07/2016 : 07:31:52
|
It happened to me again. Yesterday after 1h in the air I found it did react only on zoom change. Menu, bottom panel and turnpoint field did not react. At the same time LK changed routing to previous thermal so during the other 2h in the air I was able to see distance between thermals :)
There is no other problems were found. Speed, course and so on were pretty similar to LK installation on Holux.
After 10 minutes on the ground menu started to work again like nothing happened so I was able to close application via Exit menu.
Here is the LK8000 dir from my KOBO mini with last IGC: https://paraplan.ru/forum/files/6139/TwzGX4uv.rar |
Edited by - mzeddd on 03/07/2016 07:46:10 |
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 03/07/2016 : 16:21:37
|
Hardware problem with touch sensors. Solution is to install a screen border protection. |
|
|
Aleksandar
Falchetto
Yugoslavia
167 Posts |
Posted - 03/07/2016 : 16:42:22
|
Paolo what screen border protection? |
Best regards, Aleksandar Cirkovic |
|
|
mzeddd
Pulcino
Russia
82 Posts |
|
Topic |
|