PostFrontal Forum
PostFrontal Forum
LK8000_Support_Forum | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 LK8000 International Support
 General Support
 No IGC logger record when using Flarm NMEA data
 New Topic  Reply to Topic
Author Previous Topic Topic Next Topic  

JF Gombault
New Entry

1 Posts

Posted - 30/05/2024 :  16:03:29  Show Profile  Reply with Quote
I have been using LK8000 for 10 years and I always used to have IGC files stored in the logger directory afetr landing.
However, I tested the recent android version 7.4.5 connected to the flarm through Buetooth and i did not get any IGC files stored after my flight ended. I could see my flight details during the flight in the analyse option, bu no IGC files was generated.
Did I miss something ?
In my config2/3 setup menu 20 Auto logger in ON
Should I start also the logger in the Config 2/3 menu with pressing Logger start ?
What is the NMEA logger ?
I feel frustrated with these change without clear instruction for using it ...



Hopefully I could downlod the IGC file from the flarm, but I was desapointed not having it recorded with the LK8000 software.

andydasmith
Pulcino

United Kingdom
60 Posts

Posted - 04/06/2024 :  12:12:19  Show Profile  Visit andydasmith's Homepage  Reply with Quote
XCSoar v7.42 has the same problem on recent Android phones, icg logging stops after an hour or so and there is no NMEA logging if the phone has the screen switched off (i.e. using the phone as a backup logger)
Go to Top of Page

brunotl
Pterodattilo

France
1142 Posts

Posted - 04/06/2024 :  17:13:29  Show Profile  Reply with Quote
quote:
Originally posted by JF Gombault

I have been using LK8000 for 10 years and I always used to have IGC files stored in the logger directory afetr landing.
However, I tested the recent android version 7.4.5 connected to the flarm through Buetooth and i did not get any IGC files stored after my flight ended. I could see my flight details during the flight in the analyse option, bu no IGC files was generated.
Did I miss something ?
In my config2/3 setup menu 20 Auto logger in ON
Should I start also the logger in the Config 2/3 menu with pressing Logger start ?
What is the NMEA logger ?
I feel frustrated with these change without clear instruction for using it ...



Hopefully I could downlod the IGC file from the flarm, but I was desapointed not having it recorded with the LK8000 software.




no way to disable IGC logger, so if takeoff is detected, igc file is created.

to check if samething is wrong with your device, take a look to RUNTIME.log

for remenber, lk8000 files location as changed for compatibility with Android >= 11, so maybe you look at the wrong place ...
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
Jump To:
PostFrontal Forum © PostFrontal - La community del Volo a Vela Go To Top Of Page
This page was generated in 0.14 seconds. Snitz Forums 2000

Since 2006, owned and maintained by PostFrontal S.A.S. di Giuliano Golfieri & c. - VAT ID: IT05264240960
THIS WEBSITE ONLY USES FUNCTIONAL COOKIES
Privacy & Cookie Policy