Author |
Topic |
|
Alebu
Falchetto
Italy
105 Posts |
Posted - 19/05/2017 : 15:10:46
|
Hi, just after the updating to 6.1g I got the map shift shown in the following picture. It is the same on PC and Android.
Regards |
Edited by - Coolwind on 05/06/2017 02:43:36 |
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 19/05/2017 : 21:11:54
|
I am very sorry. 6.1g unusable in flight. Version retired.
|
|
|
mzeddd
Pulcino
Russia
82 Posts |
Posted - 19/05/2017 : 21:20:53
|
6.1G retired? |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 20/05/2017 : 08:18:58
|
As I said in other post, worked for me in flight, did not notice any problem using V2. Also replay of flight seems OK. |
|
|
pierfax
Pterodattilo
Italy
1030 Posts |
Posted - 20/05/2017 : 09:52:36
|
look better in your device.... maps are not correct.
quote: Originally posted by davesalmon
As I said in other post, worked for me in flight, did not notice any problem using V2. Also replay of flight seems OK.
|
Pier Fassina |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 20/05/2017 : 15:41:32
|
What are we looking for, because I cannot see anything wrong with my maps, and there was nothing wrong when I flew. Terrain looks OK, topology looks OK, waypoints look OK, airspace looks OK. Maps are not new, used them for years. |
|
|
ToninoTarsi
Falchetto
Italy
113 Posts |
Posted - 21/05/2017 : 11:43:17
|
quote: Originally posted by davesalmon
What are we looking for, because I cannot see anything wrong with my maps, and there was nothing wrong when I flew. Terrain looks OK, topology looks OK, waypoints look OK, airspace looks OK. Maps are not new, used them for years.
The bug is related to which terrain you are using so it is not present in all configurations. Was just a sneaky bug :-( Tony
|
www.VoloLiberoMonteCucco.it |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 21/05/2017 : 13:56:51
|
So, I will carry on with 6.1g. |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 26/05/2017 : 20:31:40
|
I have flown twice since with 6.1g no obvious problem. Airspace heights were correctly displayed and warned. However just setting something at home, and coupled my GT altimeter to the V2, rather than using the Flarm in the glider. During startup the baro alt shows correctly as 495 ft, but as soon as the screen message says Using bar alt, and gives the setting information, the baro alt changes to 1000ft. The waypoint information is correct at 495ft, ther bottom bar says QFE is 0. Is this something to do with the above problem, or I suppose it could be the GT Altimeter. |
|
|
davesalmon
Pterodattilo
United Kingdom
1620 Posts |
Posted - 26/05/2017 : 20:52:23
|
Can now confirm it is the same problem, the terrain has been moved about 10kms east relative to the topology, or the topology has moved west. |
|
|
|
Topic |
|