PostFrontal Forum
PostFrontal Forum
PF Home | International_Forum | Profile | Register | Active Topics | Members | Search | FAQ | Upload image
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 LK8000 International Support
 General Support
 Lk800 & LX160si problem		  New Topic  Reply to Topic
Author Previous Topic Topic Next Topic  

as2357
New Entry

France
3 Posts
Posted - 17/05/2012 :  19:13:02  Show Profile  Reply with Quote
I have an Oudie running LK8000 connected to an LX160. I can change the Mc and ballast (but not bugs) on the LK using the hardware switches on the LX160 but not the other way around. The same applies to bugs and ballast.

Nothing I do on the LK device seems to send data back to the LX160. I have tried auto Mc mode as well as manual.

Am I missing anything?

AlphaLima
Moderator

Germany
847 Posts
Posted - 19/05/2012 :  22:01:40  Show Profile  Visit AlphaLima's Homepage  Reply with Quote
I'm not 100% sure if the LX160 supports both directions, you should use the LX16xx driver and check if both directions Rx/Tx, with a terminal prgramm (e.g. Putty).
Go to Top of Page

as2357
New Entry

France
3 Posts
Posted - 22/05/2012 :  22:09:03  Show Profile  Reply with Quote
Now confirmed, the LX160si does not support bidirectional data transfer. It is only possible to control the LX using the LK800 unit and not vice versa.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
Jump To:
PostFrontal Forum © 2005-2010 PostFrontal - La community del Volo a Vela Go To Top Of Page
This page was generated in 0.16 seconds. Snitz Forums 2000