Combination Colibri+LX160+LK8000 (Vertica V1). TAS and IAS are selected to bottom bar and shown ok (both 0 kph on ground, not flown yet). When I disconnect USB cable the speed indications still are TAS and IAS (they are not changed automatically to eTAS and eIAS). After disconnecting the cable GPS is switched to internal GPS and also baro info is changed correctly.
When I start the program with internal GPS, eTAS and eIAS are shown. Switching to TAS and IAS is automatic, when I connect the USB cable, so this direction works ok.
Tried with 3.0b and 3.1c and the operation was same.