| Author |
 Topic  |
|
|
Aeronemo
Pulcino
France
14 Posts |
 Posted - 07/06/2011 : 22:54:39
|
Due to low paraglider wing loading , is it possible to have a decimal between 4 and 6 kg/m2?
For exemple if load is 4,6 kg/m2 (polar file: 110kg and 23,7 m2)When I go to basic setting, load displed is 5kg/m2 and this value will change the polar with a new weight of 119kg.
Thanks |
Leonardo Pro-MIO M400-LK8000 V3.1b |
|
|
Coolwind
Moderator
Italy
7466 Posts |
Posted - 07/06/2011 : 23:02:28
|
| It is possible, but is it needed? Does it make any difference? The polar file of PGs is always very approximated!! |
 |
|
|
Aeronemo
Pulcino
France
14 Posts |
Posted - 09/06/2011 : 19:11:21
|
Yes,it make a difference for speed to fly, no? I didn't take generic polar from your list, I've got mine ;-)
And In over hand, I understand that is not the priority.
Every pilot who want to use speed to fly only have to take care not to go in the basic seting menu!
|
Leonardo Pro-MIO M400-LK8000 V3.1b |
|
|
|
Coolwind
Moderator
Italy
7466 Posts |
Posted - 09/06/2011 : 20:59:19
|
| Ok got it, I see if I can fix it. |
|
|
|
Aeronemo
Pulcino
France
14 Posts |
Posted - 09/06/2011 : 21:51:24
|
| Thanks. Another solution is not to give acces for paraglider/hang glider to the wing loading (in the basic setting and in page with the polar). Informations are taken from the polar file only. |
Leonardo Pro-MIO M400-LK8000 V3.1b |
|
|
| |
Topic |
|
Wing loading