| Author |
 Topic  |
|
AEROSFERA
Pulcino
Mexico
20 Posts |
 Posted - 03/02/2011 : 22:02:04
|
Thanks so much Paul for you patience and everyone for your help. Thanks also to Fink here in Mexico for promoting the LK and his help.
Ok, as in the intructions, I set up the com port to COM 2, that took care of the com problem, then I changed the baud rate to 9600 and tryied with 57600 also, now the problem is that the program after some seconds, freezes and nothing in the screen works so I have to hard reset the unit. Any ideas what I might be doing wrong?. |
Lucas, AEROSFERA, Mexico. |
 |
|
|
AEROSFERA
Pulcino
Mexico
20 Posts |
Posted - 03/02/2011 : 23:01:19
|
The GPS utililities in the mio pocket indicates that the interna gps is in com 2 at 4800 baud and MNEA protocol, is this correct?
Thanks in advance. |
Lucas, AEROSFERA, Mexico. |
|
|
|
AEROSFERA
Pulcino
Mexico
20 Posts |
Posted - 04/02/2011 : 03:39:46
|
| Well, changed the baud rate to 4800, and ITS ALIVE! Now I just need some good weather to fly! Thank to all, specially to Pual for its kind guidance and patience! |
Lucas, AEROSFERA, Mexico. |
|
|
|
TiGuy82
Pterodattilo
Canada
1451 Posts |
|
|
AEROSFERA
Pulcino
Mexico
20 Posts |
Posted - 04/02/2011 : 17:49:50
|
TiGuy82, Does this difference have to do with the GPS engine?
|
Lucas, AEROSFERA, Mexico. |
|
|
|
TiGuy82
Pterodattilo
Canada
1451 Posts |
Posted - 06/02/2011 : 20:22:16
|
For those who want to have a music player running while using LK8000.
- Install GliderTools unlock
- Update to the V2
- Download this file: http://www.megaupload.com/?d=IIHG763F
- Extract the folders to the root of your MIO and overwrite all the files and folder requested.
Have fun! :) |
www.facebook.com/LK8000 |
|
|
|
AEROSFERA
Pulcino
Mexico
20 Posts |
Posted - 07/02/2011 : 05:01:23
|
| Hello again, I fixed aparently the problem of the program freezing, by changing the biadu rate and com ports, I had a nice flight today, but to my surprise it froze again i did not do any modifications other than uoloading new waypoints in compegps format, any ideas? PAUL? TiGuy? |
Lucas, AEROSFERA, Mexico. |
|
|
|
TiGuy82
Pterodattilo
Canada
1451 Posts |
Posted - 07/02/2011 : 14:50:16
|
| Are you using glidertools unlock? Did you made the changes on the ports as I told you? |
www.facebook.com/LK8000 |
|
|
|
AEROSFERA
Pulcino
Mexico
20 Posts |
Posted - 07/02/2011 : 18:46:40
|
Im using the miopocket, since this was the only unlock that worked for reasons I dont understand, I changed the com port to com 2 and the baud rate to 4800 since this is what one of the tools in the mio pocket aplication informed, and actualy it was working ok, but I whent to fly to another lace 70 km south, I dont know if this has anything to do or changing the waypoints the simulator mode works ok but after about 8 seconds everything freezes and have to reset the m400 on the top buttom. I run the lk8000 from the CE commander.
|
Lucas, AEROSFERA, Mexico. |
|
|
|
AEROSFERA
Pulcino
Mexico
20 Posts |
Posted - 07/02/2011 : 18:47:52
|
| The bit rate is setup at 8 bit, I asume it`s ok. |
Lucas, AEROSFERA, Mexico. |
|
|
|
freewing70
Pterodattilo
Italy
1076 Posts |
Posted - 07/02/2011 : 19:53:49
|
Hello,
WOW, 1st impact: I love LK8000 on Mio Moov 4000, even if the internal GPS is not as sensible as my "old" BT receiver.
Anyway.
1. With unlock 2.0 (http://store.glidertools.com/m400_lk8000_2..zip) I can't see "EXIT" button in menu 2 of MioMap; what's wrong?
2. I'm nearly planning to try iGo Primo on M400; did anyone ever tested it?
THX
Enrico
|
aeroclub valle d'aosta
http://www.aecaosta.it
|
|
|
|
GliderTools
Pulcino
Czech Republic
61 Posts |
Posted - 07/02/2011 : 20:00:34
|
1) Unfortunately, some vession of Miomap not have any exit button :(
2) If exist file \My Flash Disk\iGO8\iGO8.exe, then button "MIO" on the main unlock menu will run iGO :)
Vladimir
|
GliderTools
www.glidertools.com
info@glidertools.com
|
Edited by - GliderTools on 07/02/2011 20:02:21 |
|
|
|
freewing70
Pterodattilo
Italy
1076 Posts |
Posted - 07/02/2011 : 20:36:25
|
THX Vlad: I'm trying asap with iGo Primo; I'm changing some settings in sys.txt to match the data.zip.
BTW I simply set the path for iGo/Primo in Mio.mscr; it works great!
=:)
|
aeroclub valle d'aosta
http://www.aecaosta.it
|
Edited by - freewing70 on 07/02/2011 21:20:36 |
|
|
|
AEROSFERA
Pulcino
Mexico
20 Posts |
Posted - 09/02/2011 : 04:56:36
|
LK 8000 FREEZING --- Ok, I have tried now all the possible combinations of baud rates, and the thing keeps freezing. Some times it freezes just after a few seconds and sometimes after a minute or so, so I can't move the settings in the fly mode, only in the sim mode, will this affect in the the fly mode? I get the dialog: GPS: No valid data fix and a "ding" sound, after that it freezes.
The configuration that seems to work the best is:
Device A:
Name Generic
Port COM2
Baudrate 4800 8bit
Device B:
Name Generic
Port COM1
Baudrate 4800 8bit
PLEASE! HELP!
Paul: I`read teh manual, I don`t know what I'm doing wrong!
|
Lucas, AEROSFERA, Mexico. |
|
|
|
TiGuy82
Pterodattilo
Canada
1451 Posts |
Posted - 09/02/2011 : 05:15:04
|
On mine: (If you only have one GPS device connected to LK, you should configure it on Device A and B!!)
Device A
Name: Generic
Port: Com2
Baudrate: 57600 8bit
Device B
Name: Generic
Port: Com2
Baudrate: 57600 8bit
Serial Mode: Normal
NMEA Checksum: Enabled
Did you modify that file on your MIO? As I told you before? |
www.facebook.com/LK8000 |
|
|
|
Topic |
|
MIO M400 - LK8000 unlock