| Author |
 Topic  |
|
GliderTools
Pulcino
Czech Republic
71 Posts |
 Posted - 08/10/2010 : 16:42:31
|
quote:
Originally posted by davesalmon
[brVladimir's new file, Mio_LK8000_Unlock,is 10 times bigger 36.4 MB as opposed to 363 KB.
Dave, My unlock was released for tests. Is not done. Unlock was developed based on VisualGPS unlock, with the consent of its author, Daniel Lanik. Contains MANY parts that must be removed, but so far I have not had time for it. I promise to look at it.
Meantime I tried to test the functionality with LK8000 and MIO togehther, as I wrote in the first sentence of the first post.
Thank for understanding, Vladimir
|
GliderTools
www.glidertools.com
info@glidertools.com
|
Edited by - GliderTools on 08/10/2010 16:48:56 |
 |
|
|
miguel
Pulcino
USA
8 Posts |
Posted - 08/10/2010 : 17:20:14
|
Hi,
Yesterday, after considering both the Mio_Moov_Unlock and the MIO M400 - LK800 unlock, I decided to use the former, due to its simplicty. I have a brand new MIO Moov R403 and am happy to report that both the unlock and LK8000 work fine in it.
I also followed Paulo' instructions to set up the GPS with Orion:
"You need to set the orion software from control panel to Orion GPS service: start
Orion gps navigation OFF (OFF!)
GPS subpanel: Start orion service ON and NO Start GPS."
It worked perfectly as indicated by Paulo. Now my problem is that when I run the MIOMAP app, the GPS doesn't start. How do I have to set up the GPS in Orion before running MIOMAP?
Regards
Miguel |
|
|
|
parapenT1sta
Pterodattilo
Portugal
1864 Posts |
|
|
miguel
Pulcino
USA
8 Posts |
Posted - 08/10/2010 : 19:14:57
|
Hi,
I just tried it, but it is still not working. Does someone have another suggestion?
Regards |
|
|
|
Allan Broadribb
Aquilotto
USA
235 Posts |
Posted - 08/10/2010 : 20:23:46
|
I am using Mio_Moov_Unlock on my M400. It will run LK8000 and MioMap 2009.
The Orion GPS Service in the "General" tab is set to "Stop".
I have 7 satellites acquired in LK8000 and 8 in MioMap 2009. |
|
|
|
GliderTools
Pulcino
Czech Republic
71 Posts |
|
|
miguel
Pulcino
USA
8 Posts |
Posted - 09/10/2010 : 00:08:07
|
Allan,
Thanks for the comment. What is your Orion setup in the following:
1) General tab:
a) Orion GPS Service: on or off?
b) Orion GPS Navigation: off, sleep or on?
2) GPS tab:
a) Start Orion Service: Checked of unchecked?
b) Start GPS: checked or unchecked?
Finally, did you modify your "\Program Files\Navman\SmartST_CE\UserData\device_settings.ini" file as described in (9th posting from the top by jlder):
http://www.postfrontal.com/forum/topic.asp?TOPIC_ID=4257&whichpage=4
Regards |
|
|
|
Allan Broadribb
Aquilotto
USA
235 Posts |
Posted - 09/10/2010 : 02:04:46
|
Miguel,
1) General tab:
a) Orion GPS Service: "Stop"
b) Orion GPS navigation: "Off" - when you set the GPS service to stop this button will automatically set to "Off" with a red button beside it to the left.
When the Orion GPS Service is set to "Stop" - there are no other tabs! At the bottom of the "General" tab there will be the message "GPS service stopped"
I hope this helps - if not then I believe there may be a difference beteween the US and European models of the M400. |
|
|
|
kjub6
Pulcino
19 Posts |
Posted - 13/10/2010 : 00:25:46
|
| Hi I have a question about precision ... when I buy Mio, no aditional variometer ... what is the precision ? can I use a LK8000 on Mio as a vario ? to see if I am going +0.5 m/s up or down ? |
|
|
|
parapenT1sta
Pterodattilo
Portugal
1864 Posts |
Posted - 13/10/2010 : 02:57:52
|
| You can plug a variometer using COM port, like Flymaster F1. |
|
|
|
parapenT1sta
Pterodattilo
Portugal
1864 Posts |
Posted - 14/10/2010 : 19:58:12
|
This Unlock doesn't work on mine M400 that I bought in USA.
I have to find out where the problem, I already check some differences...
My MIO has NavMan instead of MioMap
Today I will spend some time modifying the unlock to work on mine M400. Or I will use the simple unlock recommended by Paolo |
Edited by - parapenT1sta on 14/10/2010 20:12:38 |
|
|
|
GliderTools
Pulcino
Czech Republic
71 Posts |
Posted - 14/10/2010 : 20:39:08
|
What TiGuy82 says is definitely true.
I would like to ask for help. If someone can send me a complete FlashDisk image of the MIO, what sold in the U.S.
Please compress the contents of the MIO flash-drive into a zip or rar file. Because the map files are large, leave in the zip package only one, smalest map.
Obtained. zip file then save to rapidshare or other similar services and then send me a private message with link to this file via email-poster here on the forum.
Thank for cooperation.
Vladimir |
GliderTools
www.glidertools.com
info@glidertools.com
|
Edited by - GliderTools on 14/10/2010 20:40:09 |
|
|
|
parapenT1sta
Pterodattilo
Portugal
1864 Posts |
Posted - 14/10/2010 : 20:59:16
|
| I'm uploading the file... I will emailed to you as soon is done! |
|
|
|
GliderTools
Pulcino
Czech Republic
71 Posts |
Posted - 14/10/2010 : 22:50:33
|
Thank you TiGuy82!
I downloaded this file, it's okay.
I look at it as soon and fix my unlock, so that it work properly with MioMap and with Navman too. I believe it will succeed on this weekend.
Vladimir
|
GliderTools
www.glidertools.com
info@glidertools.com
|
|
|
|
GliderTools
Pulcino
Czech Republic
71 Posts |
Posted - 15/10/2010 : 02:27:52
|
Done!
The current version (0.2) of the unlock should work just as well with the European version (Mireo), and the U.S. version (Navman) of MIO M400.
Probably will also work with versions "DigiWalker" and "Spirit".
Thank for help to TiGuy82 and Dany. Without them it would be more difficult.
Vladimir
DOWNLOAD
http://store.glidertools.com/M400_LK8000_UNLOCK.ZIP |
GliderTools
www.glidertools.com
info@glidertools.com
|
Edited by - GliderTools on 15/10/2010 02:52:26 |
|
|
|
Topic |
|
MIO M400 - LK8000 unlock
