| Author |
 Topic  |
|
Coolwind
Moderator
Italy
8957 Posts |
 Posted - 24/09/2010 : 23:17:44
|
I have no backlight problem on the MIO 400. Once set to max, it never resets like other PDAs and PNAs. So no need to change it. The mio moov unlock is very straightforward , 30 seconds and it is ready to use!!
|
 |
|
|
pierfax
Pterodattilo
Italy
1030 Posts |
Posted - 25/09/2010 : 18:12:05
|
ciao can someone make a little guide to set lk8000 on mio m400 ?
unlock, baclight ecc ...
and also, It's possible to use eneloop that I use for 314 ?
thank's
Pier |
Pier Fassina |
|
|
|
parapenT1sta
Pterodattilo
Portugal
1865 Posts |
Posted - 25/09/2010 : 19:03:02
|
| Vlad is making a unlock for the MIO M400 :) Maybe he can provide us what he done already. |
|
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 26/09/2010 : 21:16:50
|
Today I had another flight with the MIO 400, which is replacing the HP314 in my cockpit. Visibility was excellent! Here is a picture taken at h15 while heading east at 2560m QNH. Sun is on the back-right, very strong.
|
|
|
|
jlder
Pulcino
France
34 Posts |
Posted - 26/09/2010 : 23:59:25
|
Ciao,
I don't know if I did something wrong but the road navigation software (SmartST) does not find the GPS anymore after unblocking the MIO.
I guess it works the first time but after a reset it stops seeing GPS.
LK8000 continues to get GPS without any problem.
JL |
|
|
|
Marco from Hangar 5
Pterodattilo
Netherlands
896 Posts |
Posted - 27/09/2010 : 01:23:20
|
| This really looks very well Coolwind, I wish there was a MIO400 with SPP bluetooth |
Marco
BU (PH-588)
Mini Nimbus HS7, s/n 039
http://www.zweef.nl/
Zweefvliegcentrum Noordkop, NETHERLANDS |
|
|
|
ice007
Aquila imperiale
Italy
451 Posts |
Posted - 27/09/2010 : 21:34:18
|
Hello!
I'm very happy of my Mio Moov M400, yesterday I tested in flight with our ASK21 Glider's club. The battery duration was about 1,5 hour but it wasn't at 100% full charge, only 70% at takeoff with no power supply from cockpit. The used software was LK8000 1.22a.
The backlight in the photo was about 80%. For setting brightness at 100% is necessary editing:
\\My Flash Disk\Program Files\Navman\SmartST_CE\UserData\user_settings.xml
and add lines:
<property name="screen brightness" value="10" />
<property name="screen brightness at night" value="10" />
ice
|
MArco - ...ala a compasso...
AVL Alzate Brianza |
Edited by - ice007 on 27/09/2010 21:35:49 |
|
|
|
smielek00
Pulcino
45 Posts |
Posted - 27/09/2010 : 23:44:40
|
Could someone post a pix of Oudie in direct sunlight to see how it fares with M400?
Speaking of Oudie, what Chinese unit is a base of that?
A. |
|
|
|
jlder
Pulcino
France
34 Posts |
Posted - 28/09/2010 : 11:53:52
|
Answering my own post concerning MIO nav software not working anymore after the unlock.
I forced gps port to COM2 in the ini scrip.
file name :
G:\Program Files\Navman\SmartST_CE\UserData\device_settings.ini
changes in bold
[HWVersion=100]
gps port=COM2
...
[GPS=ATHEROS]
gps port open=true
gps port=COM2
...
Would be curious to know if other people had the same issue.
Not that it is very important but it is still nice to be able to use the road navigation software. |
|
|
|
CMRichie
Pulcino
United Kingdom
13 Posts |
Posted - 28/09/2010 : 19:32:06
|
| Hi Congrats to Paulo |
|
|
|
CMRichie
Pulcino
United Kingdom
13 Posts |
Posted - 28/09/2010 : 19:43:44
|
2nd attempt doh!
Big thanks to Paulo and all the team. LK8000 1.22b working very well on my HP314. I have bought a Mio Moov 400 for the rear cockpit, but for some reason I cannot get the application to open, after unlocking the device. Could someone please give a little guide for the location of files, in the Moov or provide an ammendment to the LK8000 manual. Reading the posts I guess I am not the only one who is having probs.
Regards Richie |
|
|
|
tomm
Pulcino
12 Posts |
Posted - 29/09/2010 : 06:37:23
|
I have installed mov unlock and lk but I do not have a gps signal as well. My settings are as follow:
Orion GPS service: Start
Orion GPS Navigation: Off
GML Tab:
GML Serial Port: COM5:GPS_COM
power signal: none
Boot Baud: 92160
Run Baud: 11520
Reset Signal: none
Mode: UNAV4
Boot select signal: none
TCXO ppb: 500
Nmea Tab:
POrt name 1: COM2
Port name 2: none
NMEA Serial Port name: none
Baud: 11520
GPS tab:
When GPS stopped, suspend GPS hardware into low power
when system is reset,
start orion service: check
start GPS: UNcheck
System time is : check by set by GPS time
Start/Wake:check
Sleep GPS: check
stop GPS: uncheck
Thanks for any help!
Tried multiple settings and no gps signal yet... |
Edited by - tomm on 29/09/2010 23:40:49 |
|
|
|
modellbobby
Aquilotto
323 Posts |
Posted - 29/09/2010 : 14:25:27
|
I highly recommend to calibrate the stylus after unlocking the mio m400. I have 2 M400 and both where abolutly not calibrated correctly. After reset this has to be done again.
i googled and found a system param showexit=1 in ini file of the smartst navigation software. So you could go to desktop without reset. |
|
|
|
jlder
Pulcino
France
34 Posts |
Posted - 30/09/2010 : 13:11:31
|
In which fiel did you add the showexit=1 parameter?
Does it add an exit button to a menu page?
JL |
|
|
|
modellbobby
Aquilotto
323 Posts |
Posted - 30/09/2010 : 15:38:30
|
i thought there is any .ini file as on IGO8, but i didnt find it  . perhaps i am wrong. |
|
|
|
Topic |
|
MIO M400 PNA, pictures compared with other units