| Author |
 Topic  |
|
|
rogcarni
Pulcino
Spain
22 Posts |
 Posted - 25/10/2009 : 13:22:03
|
i am using of course le LK8000 in stand alone.
But i have also on my Lambada an lx1600 connected to my IPAQ5550 and Winpilot pro.
The problem on my PNA 'messada" have no serial input, i am trying a converter usb to serial RS232 but does not work.
Some time ago i have send the files comming from lx1600 developper to john warrington and never have any feedback.
For information i have also the problem to saving device.
Best regards
Roger |
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 25/10/2009 : 13:37:59
|
| What is the problem Roger, LX1600 not supported? What's not supported (baro altitude, vario, task declaration?). |
 |
|
|
rogcarni
Pulcino
Spain
22 Posts |
Posted - 25/10/2009 : 18:02:37
|
quote:
Originally posted by Coolwind
What is the problem Roger, LX1600 not supported? What's not supported (baro altitude, vario, task declaration?).
in fact, the lx1600 can be connected to a pocket PC for:
1) receiving information vario, pressure static, etc...
2) the pocket PC can program the LX1600 for full scale vario2.5,5,10M/S full scale, etc...
3) if you will i have the information from lx manufacturer.
i can send to a screen copy of winpilot page for setting the LX1600
vario !!!
|
|
|
|
Coolwind
Moderator
Italy
8957 Posts |
Posted - 25/10/2009 : 19:21:33
|
Roger, I can only add pressure altitude and vario, but I cannot SEND data to the LX1600. The reason: I cannot test result. As a rule, I only send data to devices I can test personally. Otherwise I am just loosing my time...
I thought that the 1600 was already recognized by xsoar for pressure altitude.
|
|
|
| |
Topic |
|
lk8000 connected to LX1600