| T O P I C R E V I E W |
| davesalmon |
Posted - 18/07/2024 : 17:13:59
I was checking something out today, all electrics switced on, Flarm was working (as it did yestyerday when flying) and sending data to Lk8000. Suddenly Flarm signal was lost. Tried re-starting, re-set oom ports, nothing worked, though the Flarm display (LX LED+) seemed to indicate all OK. LK8000 cannot find Flarm.
Looking at the Runtime log, Flarm is device A, I get:
000273395] Device A ready @h14:23:48 (UTC 13:23)
[000277547] ComPort Error : read failed, socket might closed or timeout, read ret: -1.
Several similar entries with later attempts.
Any ideas please, might a re-installation of the program be the answer?
|
| 7 L A T E S T R E P L I E S (Newest First) |
| kestrel539 |
Posted - 02/08/2024 : 15:25:03
Thanks. Will give it a try |
| brunotl |
Posted - 01/08/2024 : 22:58:26
quote:
Originally posted by kestrel539
LK8000, on Android. Connected to Fenix vario via BT on Device A.
LX powermose connected to Fenix via cable.
No Flarm input to LK.
Anything I can do about this?
Thanks
you need to enable "PFLAx" in Fenix dataport settings :
cf. Fenix doc page 56 & 62
https://www.rc-electronics.eu/wp-content/uploads/2022/02/Fenix-Manual_v1_5_B50.pdf |
| kestrel539 |
Posted - 01/08/2024 : 17:52:08
LK8000, on Android. Connected to Fenix vario via BT on Device A.
LX powermose connected to Fenix via cable.
No Flarm input to LK.
Anything I can do about this?
Thanks |
| davesalmon |
Posted - 19/07/2024 : 19:45:26
However this morning it worked OK again, and I flew with it. Nothing changed other than Flarm update and re-config. |
| brunotl |
Posted - 19/07/2024 : 14:10:12
you write : "Suddenly Flarm signal was lost."
that look like BT dongle hardware fault ... |
| davesalmon |
Posted - 19/07/2024 : 08:02:33
BT using Soartronic BT1. Worked well for years. No fault indications on Flarm, but have installed latest firmware 7.25, though was updated to 7.24 2 months ago, re-configured as well. Have another go today, and will also try different device running LK8000. |
| brunotl |
Posted - 19/07/2024 : 00:40:50
what type of connection is used ? |
