T O P I C R E V I E W |
Alebu |
Posted - 19/05/2017 : 15:10:46 Hi, just after the updating to 6.1g I got the map shift shown in the following picture. It is the same on PC and Android.
Regards |
9 L A T E S T R E P L I E S (Newest First) |
davesalmon |
Posted - 26/05/2017 : 20:52:23 Can now confirm it is the same problem, the terrain has been moved about 10kms east relative to the topology, or the topology has moved west. |
davesalmon |
Posted - 26/05/2017 : 20:31:40 I have flown twice since with 6.1g no obvious problem. Airspace heights were correctly displayed and warned. However just setting something at home, and coupled my GT altimeter to the V2, rather than using the Flarm in the glider. During startup the baro alt shows correctly as 495 ft, but as soon as the screen message says Using bar alt, and gives the setting information, the baro alt changes to 1000ft. The waypoint information is correct at 495ft, ther bottom bar says QFE is 0. Is this something to do with the above problem, or I suppose it could be the GT Altimeter. |
davesalmon |
Posted - 21/05/2017 : 13:56:51 So, I will carry on with 6.1g. |
ToninoTarsi |
Posted - 21/05/2017 : 11:43:17 quote: Originally posted by davesalmon
What are we looking for, because I cannot see anything wrong with my maps, and there was nothing wrong when I flew. Terrain looks OK, topology looks OK, waypoints look OK, airspace looks OK. Maps are not new, used them for years.
The bug is related to which terrain you are using so it is not present in all configurations. Was just a sneaky bug :-( Tony
|
davesalmon |
Posted - 20/05/2017 : 15:41:32 What are we looking for, because I cannot see anything wrong with my maps, and there was nothing wrong when I flew. Terrain looks OK, topology looks OK, waypoints look OK, airspace looks OK. Maps are not new, used them for years. |
pierfax |
Posted - 20/05/2017 : 09:52:36 look better in your device.... maps are not correct.
quote: Originally posted by davesalmon
As I said in other post, worked for me in flight, did not notice any problem using V2. Also replay of flight seems OK.
|
davesalmon |
Posted - 20/05/2017 : 08:18:58 As I said in other post, worked for me in flight, did not notice any problem using V2. Also replay of flight seems OK. |
mzeddd |
Posted - 19/05/2017 : 21:20:53 6.1G retired? |
Coolwind |
Posted - 19/05/2017 : 21:11:54 I am very sorry. 6.1g unusable in flight. Version retired.
|